I. Introduction Shaker is widely used and effective re-election equipment, some of
the basic sorting is a traditional wooden bed. Practice has proved
that wooden bed deformation easily damaged, frequent maintenance,
the use of short, wood lacquer and other raw materials becoming
increasingly scarce, it is difficult to adapt to production
development. To this end, the development of the LS-type
(6-S-type), such as new bed fiberglass to replace the wooden
bed.Identification of the structure that advanced, good
performance, reliable operation, the election of other indicators
of quality in materials, structures, manufacturing processes, such
as with wood bed is completely different from the traditional
wooden bed of a major innovation, identified to promote the use of
mass production . Production Practice has proved that the steel shaker glass surface
with a series of advantages: 1, stiffness, strength, deformation
small. 2, low water absorption, not weight gain. 3, work hard
surface damage, wear well, a small amount of maintenance. 4,
moisture absorption is not swollen, not rotten, no worm-eaten. 5,
anti-chemical corrosion, acid, pulp is not anti-pharmaceutical. 6,
good weather resistance, shape stability, and not chapped. 7,
sorting good performance, stability indicators. 8, retained the
wooden bed of the assembly size, the installation of the two
interchangeable. Our company in accordance with design drawings and
complete sets of production technology, strict quality inspection
to ensure that the technical requirements for products, welcome to
buy the majority of users. Second, use 2-0.02 mm for sorting ores and sludge levels of tungsten, tin,
tantalum, iron, manganese, chromium, titanium, bismuth, lead, gold
and other non-ferrous metals, black, dilute precious metals
minerals, sorting 4 ~ -0.02 mm Pyrite; be appropriate to change the
form of bed after the sorting at the end of coal and coal; and
sorting the proportion of other poor and have sufficient size
suitable mixture components. Can be used for rough election, Featured, sweep the election and
other operations, sorting coarse sand (2-0.5mm), fine sand
(0.5-0.074mm), sludge (-0.074), such as different grain size. Sorting mechanism and wooden bed the same. Department of sorting
using the proportion of mineral poor, provided bedside differential
movement, slope flow and different types of beds so that the
particle group in the bed surface of a loose hierarchical,
selective transport, the bed surface of the formation of fan-shaped
sub - band, which the rich and the poor output of different
products. Category Project | Model LS | YS(Yun Tin) | Transmission system | 6-S Model Bed | Yun Tin Model Bed | Supporting way | Deck supporting | Sliding support | Adjusts the slope way | Decidingtype to adjust the slope organization | Polyester FRP, embedded matrix composite structure | Bed surface structure | Gathering glass fiber reinforced plastic, burieing skeleton
composite construction | Polyester FRP, embedded matrix composite structure | Active face | Specially making wear-resisting level | customized wear layer | Bed surface specification | 1500~1850×4500 mm | 1500-1850*4500 mm | |
|